[Buildroot] {Spam?} Re: buildroot-20070604.tar.bz2 dont compile under redhat9
Rod Boyce
buildroot at teamboyce.co.uk
Tue Jun 5 09:13:52 PDT 2007
Zhangsn,
It seems that your Linux box does not have all the packages need to
build. With fedora you should try 'yum install texinfo' as root. On
Red Hat 9 you are going to need to download and install the texinfo
package. This is also getting a bit off topic for build-root so I
suggest you reinstall whatever you favorite Linux distro is and make
sure you install all the packages and not just the default settings.
This again is not a build root issue but a generic Linux issue.
Regards,
Rod Boyce
zhangsn98 wrote:
> Boyce:
> Yes, you are right. Thank you for your reply.
> I update the "make".It pass through the last error.
>
> But new errors comeout. I want to know what
> type linux can let the newest buildroot run smoothly.
> It is ubt,der,fedora or debain?Where has a Step-by-Step?
>
>
> new error message as follows:
>
> rm -rf $backupdir; exit $rc
> WARNING: `makeinfo' is missing on your system. You should only need it if
> you modified a `.texi' or `.texinfo' file, or any other file
> indirectly affecting the aspect of the manual. The spurious
> call might also be the consequence of using a buggy `make' (AIX,
> DU, IRIX). You might want to install the `Texinfo' package or
> the `GNU make' package. Grab either from any GNU archive site.
> make[4]: *** [/usr/src/buildroot/buildroot/toolchain_build_i686/binutils-2.17/bfd/doc/bfd.info] Error 1
> make[4]: Leaving directory `/usr/src/buildroot/buildroot/toolchain_build_i686/binutils-2.17-build/bfd/doc'
> Making info in po
> make[4]: Entering directory `/usr/src/buildroot/buildroot/toolchain_build_i686/binutils-2.17-build/bfd/po'
> make[4]: Nothing to be done for `info'.
> make[4]: Leaving directory `/usr/src/buildroot/buildroot/toolchain_build_i686/binutils-2.17-build/bfd/po'
> make[4]: Entering directory `/usr/src/buildroot/buildroot/toolchain_build_i686/binutils-2.17-build/bfd'
> make[4]: Nothing to be done for `info-am'.
> make[4]: Leaving directory `/usr/src/buildroot/buildroot/toolchain_build_i686/binutils-2.17-build/bfd'
> make[3]: *** [info-recursive] Error 1
> make[3]: Leaving directory `/usr/src/buildroot/buildroot/toolchain_build_i686/binutils-2.17-build/bfd'
> make[2]: *** [all-bfd] Error 2
> make[2]: Leaving directory `/usr/src/buildroot/buildroot/toolchain_build_i686/binutils-2.17-build'
> make[1]: *** [all] Error 2
> make[1]: Leaving directory `/usr/src/buildroot/buildroot/toolchain_build_i686/binutils-2.17-build'
> make: *** [/usr/src/buildroot/buildroot/toolchain_build_i686/binutils-2.17-build/binutils/objdump] Error 2
>
> Rgds
> zhangsn
>
>
>
>
> ----- Original Message -----
> From: "Rod Boyce" <buildroot at teamboyce.co.uk>
> To: <buildroot at uclibc.org>
> Sent: Tuesday, June 05, 2007 2:01 PM
> Subject: Re: [Buildroot] {Spam?} Re: buildroot-20070604.tar.bz2 dont compile under redhat9
>
>
>
>> zhangsn98 wrote:
>>
>>> Hi,
>>> How are you!
>>> I'm first time use buildroot under redhat9(kernel:2.4.20.8;gcc:3.2.2).
>>> I use the default(i386) in buildroot complier.then run"make";
>>>
>>>
>>> the following message show:
>>>
>>> ///////////////////////////////////////////////////////////////////
>>> mkdir -p /usr/src/buildroot/buildroot/build_i686/root
>>> if [ -d "target/generic/target_skeleton" ] ; then \
>>> cp -fa target/generic/target_skeleton/* /usr/src/buildroot/buildroot/build_i686/root/; \
>>> fi;
>>> touch /usr/src/buildroot/buildroot/build_i686/staging_dir/.fakeroot.00000
>>> find /usr/src/buildroot/buildroot/build_i686/root -type d -name CVS | xargs rm -rf
>>> find /usr/src/buildroot/buildroot/build_i686/root -type d -name .svn | xargs rm -rf
>>> if [ ! -e "/usr/src/buildroot/buildroot/toolchain_build_i686/bin/sed" ] ; then \
>>> mkdir -p "/usr/src/buildroot/buildroot/toolchain_build_i686/bin"; \
>>> rm -f "/usr/src/buildroot/buildroot/toolchain_build_i686/bin/sed"; \
>>> ln -sf "/bin/sed" "/usr/src/buildroot/buildroot/toolchain_build_i686/bin/sed"; \
>>> fi
>>>
>>> Checking build system dependencies:
>>> CC clean: Ok
>>> CXX clean: Ok
>>> CPP clean: Ok
>>> CFLAGS clean: Ok
>>> INCLUDES clean: Ok
>>> CXXFLAGS clean: Ok
>>> which installed: Ok
>>> sed works: Ok (/bin/sed)
>>> GNU make version '3.79.1,': Ok
>>> C compiler '/usr/bin/gcc'
>>> C compiler version '3.2.2': Ok
>>> C++ compiler '/usr/bin/c++'
>>> C++ compiler version '3.2.2': Ok
>>> bison installed: Ok
>>> flex installed: Ok
>>> gettext installed: Ok
>>> makeinfo installed: Ok
>>> Build system dependencies: Ok
>>>
>>> (cd /usr/src/buildroot/buildroot/build_i686/linux-2.6.20.4 ; \
>>> make -j1 ARCH=i386 CC="gcc" \
>>> INSTALL_HDR_PATH=/usr/src/buildroot/buildroot/toolchain_build_i686/linux headers_install ; \
>>> )
>>> make[1]: Entering directory `/usr/src/buildroot/buildroot/build_i686/linux-2.6.20.4'
>>> CHK include/linux/version.h
>>> make[2]: `scripts/unifdef' is up to date.
>>> make[2]: *** No rule to make target `|', needed by `asm-generic'. Stop.
>>> make[1]: *** [headers_install] Error 2
>>> make[1]: Leaving directory `/usr/src/buildroot/buildroot/build_i686/linux-2.6.20.4'
>>> make: *** [/usr/src/buildroot/buildroot/toolchain_build_i686/linux/.configured] Error 2
>>>
>>> /////////////////////////////////////////////////////////////////
>>>
>>>
>>> What wrong? How i do with this?Shall I send this in the maillist or bug tracking?
>>>
>>> Rgds
>>> zhangsn
>>>
>>>
>>> _______________________________________________
>>> buildroot mailing list
>>> buildroot at uclibc.org
>>> http://busybox.net/mailman/listinfo/buildroot
>>>
>>>
>> Zhangsn,
>>
>> I have seen this error message lots of times when trying to compile
>> build-root on RHE 3.0 it turns out that the make program you are using
>> is too old to work with build-root you need at least 3.80 your version
>> is returned as 'GNU make version '3.79.1,'
>> This appears to me not to be a bug.
>>
>> Regards,
>> Rod Boyce
>> _______________________________________________
>> buildroot mailing list
>> buildroot at uclibc.org
>> http://busybox.net/mailman/listinfo/buildroot
>>
> _______________________________________________
> buildroot mailing list
> buildroot at uclibc.org
> http://busybox.net/mailman/listinfo/buildroot
>
>
More information about the buildroot
mailing list